4 Types of Ambulance Chassis
An ambulance is an emergency vehicle that carries patients. The patient may be seriously injured, seriously ill or both. Keep in mind that the Penn Care ambulances are often called to transport both critically injured victims and healthy victims who have been involved in a minor accident, in order to bring them to the nearest hospital. An ambulance is normally a specially equipped vehicle that carries only seriously ill patients. In most cases, out-of-town medical attention is given exclusively to the seriously ill patient.
In some countries, emergency medical services, known as ambulance service, are available 24 hours a day and for a specific period of time in some locations. The ambulances are equipped with emergency equipment such as strobe, lights, sirens, emergency lights and carbon monoxide alarms. Some ambulances also carry bio-medical resources such as a defibrillator and a variety of other medical supplies. Sometimes, oxygen gas cylinders are also carried by the ambulance in case the patient's oxygen level gets low while being transported. However, a proper ambulance must carry at least one full tank of oxygen gas, in order to provide adequate medical care to all the passengers. Click this link: https://www.penncare.net to find out more about an ambulance chassis.
Generally, three types of ambulance bodies are available on the market: the mobile ambulances, the fixed ambulances and the control ambulances. A mobile ambulance is generally known as a small passenger ambulance and is suitable for transporting only one passenger. The maximum weight of this vehicle is around five hundred kilograms.
The fixed ambulance body is bigger than the mobile ambulances and is suitable for transporting several passengers. It has a capacity of up to eleven passengers, including the driver. In addition, it can be fitted with a stretcher in order to transport the injured people from the crash site to the emergency medical facility. Usually, the engine of the fixed ambulance is powered by an internal combustion engine. It is also equipped with flashing lights and sirens in order to alert the traffic as well as to ensure that the people on board to reach their destination safely.
Some states in the United States actually allow motorists to drive emergency medical services vehicles and tow trucks using their personal cars as passengers. This exemption was made in response to concerns expressed by various groups. Such vehicles may use small engines for lighter weight. As long as it meets certain state requirements, the drivers may use these cars for transporting injured people. Even though it may seem like it is against the law, some states actually permit motor vehicle operators to drive the vehicles used for transporting patients.
The last type of vehicle that you can find on an ambulance fleet is the Type II chassis, which are known for their toughness and durability. They are almost twice as strong as the type i chassis and are not as costly as the latter. You can choose between the gasoline-powered Type I and the electrical Type II ambulances. These vehicles have their own trailer mounted crane so they can be easily transported from one location to another. Check out this post to get more info on the topic: https://en.wikipedia.org/wiki/Chassis.
